Reply 
Results 1 to 6 of 6
  1. #1
    denonavr889 is offline Member
    Join Date
    Dec 2009
    Posts
    3

    Default Denon AVR 889 - can't see setup menu on my TV Help!


    I have a Denon AVR 889, about 2 years old now. This amp has a feature where you press the menu button on the amp and it brings up the menu on the TV. I pressed it to make a change, screen just went black. I tried a different TV, still screen goes black. It is hooked up via HDMI cable, tried another cable, still no luck. The HDMI cable is plugged into the input on the amp.

    I did a factory reset of the amp to see if that would fix the problem, not only did it not fix it, now I can`t use it as all my settings are gone.

    Any ideas what this cvould be..
  2. #2
    holsty101 is offline Member
    Join Date
    Feb 2007
    Location
    Seattle
    Posts
    659
    Now you've done a factory reset maybe the video output had defaulted to composite (might say in the manual)?
  3. #3
    AV_Integrated's Avatar
    AV_Integrated is offline Forum Member Moderator
    Join Date
    Oct 2006
    Location
    Washington, DC - USA
    Posts
    7,130
    Look at the manual, but not all Denon's necessarily output their menus via HDMI. Maybe only via component or composite video.
  4. #4
    denonavr889 is offline Member
    Join Date
    Dec 2009
    Posts
    3
    No I don't see that anywhere. I noticed it did have a section in the manual about making sure that the HDMI setting is set to a digital output because it can't carry an analog signal, which makes sense. What doesn't make sense is why wouldn't Denon have their HDMI output set to digital? I managed to get my TV to work just using the actual impossible to navigate menu on the receiver, still need to get my PS# going which is on HDMI 2, and I would like to get the whole on screen mneu thing working.

    I remember when I first purchased my receiver, all I did was hook the HDMI cable up from my receiver to my TV, pressed menu and it worked. Very strange. And I did try another tv with a HDMI connection, still didn't work. The screen just goes black when I press menu, so a signal is being received, my guess is I have ot figure out how to change the HDMI setting in my receiver to digital?

    At work all day today, won't get a chance until tomorrow evening to look.

    Thanks all for your suggestions
  5. #5
    mmmmDoNut's Avatar
    mmmmDoNut is offline Member
    Join Date
    Feb 2007
    Posts
    1,107
    The menu should be on the front panel of your Denon as well. I know mine is front panel as well as on screen display via hdmi.
    Video: 70" JVC HD-70G886, Denon 2807, Toshiba HD-A2, Toshiba BDX2000, aTV, SageTV
    Audio: Athena WS-100 (F), WS-60 (C,SL/R), WS-15 (SBL/R), AS-P4100
    The Nightman Cometh "You've got to pay the troll toll to get into this boy's hole. You've got to pay the troll toll to get in!"

  6. #6
    denonavr889 is offline Member
    Join Date
    Dec 2009
    Posts
    3
    Oh yeah that's what I have been going with, just tedeous to navigate through.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Content Relevant URLs by vBSEO 3.5.1 PL1